# 点表配置（运行时加载 point_table.json；本文件为设计文档镜像）
site: DemoSite
system: DemoSystem
asset: DemoAsset
devices:
  - deviceId: EdgeDevice_01
    stableDeviceKey: EdgeDevice_01
    protocol: modbus
    points:
      - pointId: MotorTemperature
        displayName: 电机温度
        signalType: AI
        physicalChannel: AI_Channel_01
        register: 40001
        unit: "℃"
        scale: 0.1
        range: [0, 200]
        access: read
        dataTopic: data/EdgeDevice_01/MotorTemperature
      - pointId: MotorSpeed
        displayName: 电机转速
        signalType: AI
        physicalChannel: AI_Channel_02
        register: 40002
        unit: rpm
        scale: 1.0
        range: [0, 1000]
        access: read
        dataTopic: data/EdgeDevice_01/MotorSpeed
      - pointId: MotorCurrent
        displayName: 电机电流
        signalType: AI
        physicalChannel: AI_Channel_03
        register: 40001
        unit: A
        scale: 0.1
        range: [0, 100]
        access: read
        dataTopic: data/EdgeDevice_01/MotorCurrent
      - pointId: MotorVoltage
        displayName: 电机电压
        signalType: AI
        physicalChannel: AI_Channel_04
        register: 40002
        unit: V
        scale: 1.0
        range: [0, 100]
        access: read
        dataTopic: data/EdgeDevice_01/MotorVoltage
      - pointId: ValveOpening
        displayName: 阀门开度
        signalType: AO
        physicalChannel: AO_Channel_01
        register: 40002
        unit: "%"
        scale: 1.0
        range: [0, 100]
        access: read_write
        cmdTopic: control/cmd/EdgeDevice_01/ValveOpening/set
        ackTopic: control/ack/EdgeDevice_01/ValveOpening
        dataTopic: data/EdgeDevice_01/ValveOpening